Descrizione
I numeri originali 0295452332 e 0265109466 identificano questo come originale Mercedes-Benz ABS, ESP, PML and BAS control module for the W210 E-Class. Sourced from a running donor vehicle and tested prior to listing, this is genuine used OEM stock.
The ABS/ESP control module is the central processor for the braking stability systems on the W210 E-Class. It continuously reads wheel speed data from all four sensors alongside yaw rate and lateral acceleration inputs. ABS prevents wheel lock-up during emergency braking by individually modulating hydraulic pressure at each corner. ESP (Electronic Stability Programme) detects oversteer and understeer through the yaw rate sensor and applies selective wheel braking and engine torque reduction to restore the intended trajectory. BAS (Brake Assist System) amplifies brake pressure during emergency stops identified by pedal application speed. PML (Pre-emptive Brake Pressure Modulation) pre-fills the brake circuit to reduce ABS response time and shorten stopping distances. The module communicates with the hydraulic unit, engine ECU and instrument cluster over the CAN bus.
Warning signs of module failure include ABS, ESP or BAS lights illuminating on the instrument cluster, deactivation of anti-lock braking, stability control or brake assist functions, stored fault codes in the ABS/ESP module retrievable via Star Diagnosis or a compatible OBD scanner, erratic brake pedal behaviour during hard stops, or the ESP/BAS OFF indicator illuminating without driver input.
This unit is in good used condition and is ready for fitment. Many similar OEM part numbers exist across the W210 E-Class range — always cross-reference the exact number printed on the module with your vehicle’s diagnostic scan result or chassis number before ordering. Professional installation is strongly recommended, and coding or adaptation with Mercedes-Benz Star Diagnosis equipment may be required before the module operates correctly in your vehicle. A 14-day return period applies to all orders.
Restituzione accettata solo per difetti genuini — difettoso all'arrivo, non conforme alla descrizione o pezzo sbagliato fornito — richiesto entro 14 giorni, con tutti e 3 gli adesivi anti-manomissione intatti. Nessuna restituzione per cambio di opinione, installazione scorretta, codifica/programmazione o errori di compatibilità dell'acquirente; la verifica della compatibilità (numero originale, firmware, veicolo) è responsabilità dell'acquirente. Consulta la politica completa: https://giantparts.eu/refund-and-returns/









