1439800 BMW M54 E46 E39 X3 X5 Petrol Fuel Injector – OEM Used & Tested

10,00 €

🔥 LAST ITEM

This BMW petrol fuel injector is a genuine OEM component for M54 engines in the E46, E39, X3 and X5. Primary OEM number 1439800. It is designed to spray a precisely metered, finely atomized charge of fuel into the intake port on command from the engine control unit. A properly working injector supports smooth idle, steady fuel trims and correct fuel system operation. Typical faults include misfires, rough idle and hard starting. This is a used original part, removed from a vehicle and tested; match the exact OEM number before ordering and use professional installation where appropriate.

👀 2 people are viewing this
🔥 Selling fast right now

Use our AI Assistant — enter your ORIGINAL part number and find the exact match instantly

1 in stock

This part carries 3 anti-tamper stickers. Breaking or removing them voids the right to a fault-based return. See our Refund & Returns Policy
✔ Secure checkout
✔ Fast worldwide shipping
✔ Tested & verified OEM part
Съобщение за грешка

Моля изчислете цена на доставка, за да продължите.

Цена на поръчка:
Цена на доставка:

Description

This BMW petrol fuel injector is a genuine OEM electromagnetic fuel metering component for BMW M54 six-cylinder engines found in the E46 3 Series, E39 5 Series, X3 and X5. Primary OEM number 1439800. It is designed to open and close on command from the engine control unit, delivering a precise, finely atomized spray of fuel into the intake port so that fuel and air mix evenly before combustion takes place in the cylinder.

Its job is to supply exactly the amount of fuel the engine needs at every load and speed, with a consistent spray pattern and a fast, repeatable opening and closing response on every cycle. A properly working injector supports smooth idle, crisp throttle response, stable fuel trims, good fuel economy and correct operation of the whole fuel system, including clean combustion and emissions control.

Common signs of a faulty unit include misfires on a single cylinder, rough or unstable idle, hard starting, hesitation under acceleration, higher fuel consumption, a raw fuel smell and lean or rich mixture fault codes. When an injector leaks, clogs or sticks, the engine may run unevenly, lose power, overheat a cylinder or slowly damage the catalytic converter over time.

This is a used original part, removed from a vehicle and tested before sale. Match the exact OEM number 1439800 before ordering. Professional installation is recommended, and a fuel pressure check, injector balance test, new seals and O-rings and a scan tool diagnosis are advised where applicable.

Warranty & Returns

Returns accepted only for genuine faults — faulty on arrival, not as described, or wrong part supplied — requested within 14 days, with all 3 anti-tamper stickers intact. No returns for change of mind, incorrect installation, coding/programming, or buyer compatibility errors; checking compatibility (OEM number, firmware, vehicle) is the buyer’s responsibility. Full policy: https://giantparts.eu/refund-and-returns/

Additional information

Weight 1 kg

You may also like…

0
0
Your Cart
Your cart is emptyReturn to Shop
Live chat support
×
Avatar
GiantParts
AI Assistant
Hello, I'm GiantParts AI. Send your OEM number or car model to find the correct part.
 
For best results, enter the OEM number exactly as shown on the part.